| After-sales Service: | One Year |
|---|---|
| Warranty: | One Year |
| Certification: | ISO 9001:2000 |
| Power Source: | Hydraulic |
| Operation Pressure: | Atmospheric Pressure |
| Applicable Medium: | Crude Oil |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier 
DEENPU offers "Y" center latch, slip type manual elevators for tubing (YT, MYT) and casing (YC, HYC, MYC). The elevators hoist a variety of small casing and tubing with the proper size slips and slip setting ring installed. The slips are easily changed. The elevator is designed with two (2) halves of similar weights for good balance and easier opening and closing. A guarded operating latch and an extra handle at the rear of the elevator allow for easier, safer operation. Elevators are equipped with a latch and latch lock combination. To open, pull the latch lock handle out and swing the elevator apart. The latch and latch lock secures automatically when the elevator is closed around the pipe. The load causes the slips to set when the elevator is raised, pushing down on the slip setting ring.
Ensure all slip inserts are free in the up position when latching the elevator
Use the ears for lifting elevator - NOT the handles
Specification:
| Main Technical Parameters: | |||
| Model | Size | Rated Capacity | |
| mm(in) | kN | Short Tons | |
| HYT | 60.3-88.9(2.3/8-3.1/2) | 1350 | 150 |
| YT | 33.4-88.9(1.3/5-3.1/2) | 675 | 75 |
| MYT | 33.4-73(1.3/5-2.7/8) | 360 | 40 |
| LYT | 26.7-52.4(1.05-1.1/16) | 180 | 20 |
| HYC | 88.9-139.7(3.1/2-7) | 1800 | 200 |
| MYC | 88.9-117.8(3.1/2-7) | 1125 | 125 |
| YC | 88.9-117.8(3.1/2-7) | 675 | 75 |
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}