API 11b 5/8" 3/4" 7/8" 1" 1-1/8" Sucker Rods, Drive Rods and Pony Rods

• Customization: Available
• After-sales Service: 1year
• Warranty: 1year
• Model NO.: sucker rod
• Certification: ISO 9001:2000
• Power Source: Hydraulic
• Operation Pressure: Atmospheric Pressure
• Applicable Medium: Crude Oil
• Structure: Horizontal
• Material: Alloy
• Factory Direct: Fatory
• Transport Package: Export Packing
• Specification: 5/8" 3/4" 7/8" 1" 1-1/8"
• Trademark: Deenpu
• Origin: China
• HS Code: 84314310
• Production Capacity: 100000

Product Description

All rods are straightened and inspected by Eddy Current/magnetic for surface defects. Both ends are upset by automatic high-speed hot forging. Rods are full length normalized to relieve residual stresses, air-quenched, and tempered to refine and homogenize grain structure, and surface nor peened to remove any remaining heat treat scale. All rods are with longer fatigue life. Upset pin blanks are machined and dimensions gauged. Pin threads are cold-formed to strengthen the thread from fatigue. An inhibitor lubricant is applied to each pin and a thread protector is installed. An oil-soluble coating protects rods from atmospheric corrosion in storage. All rods are bundled to prevent handling damage during transportation to the well location. Quality control inspections are performed at each step of the manufacturing process.

 

Product Details
 

• sucker rod designed and manufactured according to API11B

• The sucker rod is a slender rod in a pumping well. It is connected with a smooth rod on top and a pumping pump on the bottom to transfer power.

 

Specifications

Nominal size	Φ16(5/8")	Φ19(3/4")	Φ22(7/8")	Φ25(1")	Φ29(11/8")
Diameter of rod	15.88+0.18-0.36	19.05+0.20-0.41	22.23+0.20-0.41	25.40+0.23-0.46	28.58+0.25-0.51
(0.625+0.007-0.014)	(0.750+0.008-0.016)	(0.875+0.008-0.016)	(1.000+0.009-0.018)	(1.125+0.010-0.020)
Shoulder diameter of pin end	31.8+0.13-0.25	38.1+0.13-0.25	41.3+0.13-0.25	50.8+0.13-0.25	57.2+0.13-0.25
(1.250+0.005-0.010)	(1.500+0.005-0.010)	(1.625+0.005-0.010)	(2.000+0.005-0.010)	(2.250+0.005-0.010)
Width of wrench square	22.2(0.875)	25.4(1.000)	25.4(1.000)	33.3(1.313)	38.1(1.500)
Length of wrench square	31.8(1.250)	31.8(1.250)	31.8(1.250)	38.1(1.500)	41.3(1.625)
Length of sucker rod (API Standard)	508(20)	508(20)	508(20)	508(20)	508(20)
1118(44)	1118(44)	1118(44)	1118(44)	1118(44)
1727(68)	1727(68)	1727(68)	1727(68)	1727(68)
2337(92)	2337(92)	2337(92)	2337(92)	2337(92)
2946(116)	2946(116)	2946(116)	2946(116)	2946(116)
7518(296)	7518(296)	7518(296)	7518(296)	7518(296)
9042(356)	9042(356)	9042(356)	9042(356)	9042(356)
Length of sucker rod (Chinese Standard)	900,1400,1900,	900,1400,1900,	900,1400,1900,	900,1400,1900,	900,1400,1900,
2400,2900,3400,	2400,2900,3400,	2400,2900,3400,	2400,2900,3400,	2400,2900,3400,
	79,009,900	79,009,900	79,009,900	79,009,900	79,009,900
Upset flange diameter	31.1+0.13-3.17	35.7+0.13-3.17	38.1+0.13-3.17	48.4+0.13-3.17	55.6+0.13-3.17
(1.219+0.005-0.125)	(1.406+0.005-0.125)	(1.500+0.005-0.125)	(1.906+0.005-0.125)	(2.188+0.005-0.125)
AR±3.2(±0.125)	47.6(1.875)	57.1(2.250)	66.7(2.625)	76.2(3.000)	85.7(3.375)
CR+1.59-0.40	3.2(0.125)	3.2(0.125)	4.8(0.188)	4.8(0.188)	4.8(0.188)
(+0.063-0.016)

Drive Rod:

Rod Size (inch)	Rod Size (mm)	Rod Pin Size (inch/mm)	API Standard length	Pony Rod Length
1	25.40	7/8'' (22.3mm)	25 ft (7620 mm) 26 ft (8000 mm) 30 ft (9140 mm)	2 ft (600 mm) 4 ft (1200 mm) 6 ft (1800 mm) 8 ft (2400 mm) 10 ft (3000 mm) 12 ft (3600 mm)
1-1/8	28.58	1'' (25.4mm)
1-1/4	31.80	1'' (25.4mm)
1-1/2	38.10	1-1/8'' (28.58mm)

 

Mechanical Properties of Drive Rod:

Grade	Tensile Strength MPa	Yield Strength MPa	Elongation/ A 200mm %	Reduction of Fracture Size/ Z %
D	795~965	≥590	≥10	≥50
H	965~1195	≥795	≥10	≥45

 

Sucker Rod Weight List
Size	5/8'' (16mm)	3/4'' (19mm)	7/8'' (22mm)	1'' (25mm)	1-1/8'' (28mm)	1-1/4'' (32mm)	1-1/2'' (38mm)
Weight (kg/m)	1.68	2.4	3.2	4.2	5.3	6.4	9.5

 

 

Company introduction
Jiangsu Deenpu Petrochemical Machinery Co., Ltd is located in China Petroleum equipment manufacturing base in yancheng city private industrial park, Jiangsu. Major Products: Blowout preventer and accessories; Choke and kill manfold; Choke and Kill Hose; Control Panel; Wellhead & Christmas Tree; Valves; Test Pump; Bop Control Unit; Union/ Swivel Joint/ Fitting; Flange; Spool; Packing Elastomer.
 

 

FAQ
Q1: What's your business range?
A: We manufacture Bop, wellhed, valves ( gate valve, check valve, choke valve, plug valve ), flanges, swivel joint , pup joint and so on.
Q2: How about the quality of the managements?
A: We have a complete quality control system , all of our products will be fully pre-inspection by QC departments before shipping to you . We have the certification of ISO,API Certificate. 
Q3: Can you offer OEM or design services?
A: Yes, we have our own design department and production tools. We can make OEM products according to your requirements.
Q4: What are your terms of payment and delivery time?
A: We could accept T/T, Paypal, Western Union, Credit Assurance. Generally, we will arrange the shipment within 7 days after received payment.
Q5: How about warranty?
A: 12 months warranty.